CFI TERA STOR SATA RAID IV Podręcznik Użytkownika Pobierz pdf (Strona 18)

8 Intel® RAID Controller RS2SG244 Hardware User’s Guide

Figure 1. Installing the Intel

RAID Controller RS2SG244

4. Connect the provided internal and/or external cables into the adapter using the 4-

port combined end. Make sure the controller and cables are properly attached.

— If using an external cable, plug the cable into the connector in the end bracket.

— If using an internal cable, plug the cable into connector at the inside edge of the

adapter.

Note: To prevent throughput problems:

✧ Use the cables provided or use the shortest possible cable.

✧ Do not use cables longer than one meter.

✧ Decrease the maximum length by one foot if you are using a backplane.

✧ Do not use cross-over cables.

✧ Only connect to a SATA drive, SAS or SATA backplane, or an expander

device.

✧ Route the cables carefully.

✧ Check that the controller and cables are all properly attached.

AF003498

PCI Express* Slot

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Brak uwag

CFI TERA STOR SATA RAID IV Podręcznik Użytkownika Strona 18